- Home
- Products
- SICK
- Registration Sensors
- Contrast Sensors
- KTX-WP91341242ZZZZ Contrast sensors SICK | Sensorik Automation SB
KTX-WP91341242ZZZZ Contrast sensors SICK | Sensorik Automation SB
Quantity
KTX-WP91341242ZZZZ | Part no.: 1078146
Contrast sensors
|
KTX Prime
- Teach-in mode: 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode
- Light source: LED, RGB
- Sensing distance: 40 mm
- Switching output: PNP
- Light spot size: 3.9 mm x 0.9 mm
- Connection type Detail: Male connector M12, 4-pin
- Device type: Standard
-
-
Features
Special applications Standard Device type Standard Dimensions (W x H x D) 30 mm x 53 mm x 78.5 mm Sensing distance 40 mm Sensing distance tolerance ± 3 mm Housing design (light emission) Rectangular Light source LED, RGB 1) Wave length 470 nm, 525 nm, 625 nm Light emission Long side of housing Light spot size 3.9 mm x 0.9 mm Light spot direction Vertical 2) Receiving filters None Teach-in mode 1-point teach-in, 2-point teach-in, teach-in dynamic, auto mode Output function Light/dark switching Delay time Adjustable Special features Long sensing distance Delivery status 2-point teach-in Parameter presettings None - 1) Average service life: 100,000 h at TU = +25 °C.
- 2) In relation to long side of housing.
-
Mechanics/electronics
Supply voltage 10.8 V DC ... 28.8 V DC 1) Ripple ≤ 5 Vpp 2) Current consumption < 100 mA 3) Switching frequency 50 kHz 4) 5) Response time 10 µs 6) 7) Jitter 5 µs 8) Switching output PNP Switching output (voltage) PNP: HIGH = VS - 3 V / LOW = 0 V Output current Imax. 100 mA 9) Input, teach-in (ET) Teach: U = 10 V ... < VS Input, blanking input (AT) Blanked: U = 10 V ... < Uv Input, fine/coarse (F/C) Coarse: U = 10 V ... < Uv Input, light/dark (L/D) Light: U = 10 V ... < Uv Retention time (ET) 25 ms, non-volatile memory Connection type Male connector M12, 4-pin Protection class III Circuit protection UV connections, reverse polarity protected
Output Q short-circuit protected
Interference pulse suppression
Enclosure rating IP67 Weight 94 g Housing material Plastic, VISTAL® Optics material Glass - 1) Limit values: DC 12 V (–10 %) ... DC 24 V (+20 %). Operation in short-circuit protected network max. 8 A.
- 2) May not exceed or fall below Uv tolerances.
- 3) Without load.
- 4) With light/dark ratio 1:1.
- 5) 1-point teach-in (color mode): 16 kHz.
- 6) Signal transit time with resistive load.
- 7) 1-point teach-in (color mode): 30 µs.
- 8) 1-point teach-in (color mode): 15 µs.
- 9) Total current of all Outputs.
-