KTM-MB31194P Contrast Sensors SICK | Sensorik Automation SB
KTM-MB31194P Contrast Sensors SICK | Sensorik Automation SB Contrast Sensors Registration Sensors SICK Johor Bahru (JB), Malaysia Supplier, Distributor, Dealer, Wholesaler | Sensorik Automation Sdn Bhd
73 g
Quantity
Download Files
KTM-MB31194P.pdf (485.41 KB)
KTM-MB31194P | Part no.: 1078048
Contrast sensors
 | 
KTM Core
  • Adjustment: Potentiometer
  • Light source: LED, White
  • Sensing distance: 12.5 mm
  • Switching output: PNP, NPN
  • Light spot size: Ø 2 mm (12.5 mm)
  • Connection type Detail: Cable open end, 4-wire

  • Features
    Dimensions (W x H x D) 12 mm x 31.5 mm x 21 mm
    Sensing distance 12.5 mm
    Sensing distance tolerance ± 3 mm
    Housing design (light emission) Rectangular
    Light source LED, White 1)
    Light emission Long side of housing
    Light spot size Ø 2 mm (12.5 mm)
    Light spot direction Round
    Receiving filters None
    Adjustment Potentiometer
    • 1) Average service life: 100,000 h at TU = +25 °C.
  • Mechanics/electronics
    Supply voltage 12 V DC ... 24 V DC 1)
    Ripple ≤ 5 Vpp 2)
    Current consumption < 50 mA 3)
    Switching frequency 10 kHz 4)
    Response time 50 µs 5)
    Jitter 25 µs
    Switching output PNP, NPN
    Switching output (voltage)

    PNP: HIGH = VS– ≤ 2 V / LOW approx. 0 V

    NPN: HIGH = approx. VS / LOW ≤ 2 V

    Switching mode Light/dark switching
    Output current Imax. 50 mA 6)
    Time delay None
    Connection type Cable open end, 4-wire, 2 m
    Protection class III
    Circuit protection

    UV connections, reverse polarity protected

    Output Q short-circuit protected

    Interference pulse suppression

    Enclosure rating IP67
    Weight 20 g
    Housing material Plastic, ABS
    Optics material Plastic, PMMA
    Indication

    LED indicator green: power on

    LED indicator, yellow: Status switching output Q

    • 1) Limit values: DC 12 V (–10 %) ... DC 24 V (+20 %). Operation in short-circuit protected network max. 8 A.
    • 2) May not exceed or fall below Uv tolerances.
    • 3) Without load.
    • 4) With light/dark ratio 1:1.
    • 5) Signal transit time with resistive load.
    • 6) Total current of all Outputs.

Technical drawings

 
KTM-MB31194P
Dimensional drawing KTM-xBxxx94x
KTM-MB31194P
Adjustments KTM Core
KTM-MB31194P
Connection type See table: Connection/Pin assignment
 
KTM-MB31194P
Setting the switching threshold
KTM-MB31194P
Sensing distance

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version