MK2600 Canon ID Printer
MK2600 Canon ID Printer  Canon Cable ID printer Johor Bahru (JB), Malaysia Supplier, Distributor, Dealer, Wholesaler | Sensorik Automation Sdn Bhd
Quantity
Download Files
MK2600_MK1500_Brochure.pdf (2.28 MB)

Canon ID Printer Mk2600

High productivity with 0.01% stops fine pitch adjustment

The Mk2600 prints precise characters of up to 300 dpi for tubes, labels, strip and more. With a large LCD display and automatic full and half-cutting, it offers smooth and easy printing from start to finish.

  • Full/Half Automatic Cut
  • High speed and fast output rate up to 40 mm/sec.
  • Various print patterns

Card & Label Specification

Printing Method

Thermal Transfer

Resolution

up to 300 dpi

Printing Speed

Tube

High Speed: 40 mm/s*1
Middle Speed: 25 mm/s
Low Speed: 18.5 mm/s

Label

High Speed: 40 mm/s
Middle/Low Speed: 25 mm/s

Output Rate*2

High Speed: About 42 pcs/min
Middle Speed: About 35 pcs/min
Low Speed: About 30 pcs/min

Ink Ribbons

Ribbon Cassette

Black: 100 m
White: 85 m

Character Sizes

1.3 mm (only full-width available),
2 mm, 3 mm, 6 mm
(full-width, half-width available for each)

Input Modes

Alphanumeric, Symbol input

Display

LCD Graphic (160 x 64 dots) with backlight

Display Capacity

10 characters/line x 2 lines (full-width) or
20 characters/line x 2 lines (half-width)
3 lines editing is possible.

Built-In Memory

Print Data

Approx. 5,000 characters

Files

Approx. 60,000 characters or
10 folders (each can save up to 99 files)

Media Cutting Function

Automatic full-cutting, Automatic half-cutting

Power Supply

AC Adaptor
(input voltage: AC 100V - 240V, 
50/60 Hz)

PC Interface

Hi-Speed USB 2.0, PC Connection Kit (included)

Operating Environment

Temperature

15 - 32.5°C
5 - 32.5°C (Without optional Tube Warmer installed)

Humidity

10 - 85% RH (with no condensation)

Storage Environment

Temperature

5 - 35°C

Humidity

10 - 90% RH (with no condensation)

Dimension (W x D x H) (approx.)

250 x 300 x 85 mm

Weight (Printer only) (approx.)

2 kg

Print Media

Tube

Type

PVC Tube*3 with Tube attachment

Size

ø 2.5 - 5.2 mm, 0.5 mm thick

Heat Shrink Tube

Type

Heat Shrink Tube*4 with Tube attachment

Size

2:1 shrinkage: ø3.2 - 6.4 mm
3:1 shrinkage: ø3.0 - 6.0 mm

Label Tape

Type

Tape Cassettes (White, Yellow, Silver)

Width

6 mm, 9 mm, 12 mm

Length

White, Yellow: 30 m
Silver: 27 m

Segment Length

Can be set from 2 to 150 mm*5

Wrap Around Tape

Type

Tape cassette (8 m) or Commercially available reel with optional Wrap Around Tape Guide

Colour

Print area only: White
Other areas: Transparent

Size

Take-up length: 8 m
Length: 33 mm

Segment Length

6 - 150 mm (depends on cut setting)

Plate

Specified Thickness

0.5 mm*6 with optional Plate attachment

Width

8 mm, 8.5 mm, 9 mm, 9.5 mm, 10 mm

4 mm ID Strip

Type

4mm ID strip cassette (white)

Size

Width: 4 mm
Length: 5 m

Segment Length

Can be set from 8 to 150 mm

 

  1. When optional Tube Warmer is used, the maximum printing speed is 25 mm/s.
  2. Printing 20 mm tubes, 5 full-size characters, consecutive print mode, half-cutting.
  3. Before using a tube, be sure to check whether characters can be print on it.
  4. Before using a tube, be sure to check whether characters can be print on it. Heat Shrink Tube cannot be used with optional Tube Warmer.
  5. If 1.3 mm full-width or 2 mm half-width character is selected for segment length of less than 3 mm, text might be printed crossing over the cutting line.
  6. Plates of other thickness should be tested before printing. Manual cut only.

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version