D5000 series
Quantity
General Features
- More than 25 modules suitable for SIL 3 applications according to IEC 61508, IEC 61511.
- Independent power supply circuit for each channel.
- Double units are equivalent to two single units because of the absence of common circuitry.
- Single channel versions available if required, to provide single loop integrity on Emergency Shut Down and Fire & Gas applications.
- Configuration components are easily accessed by removing cover.
- DIP switch configurability for easy field setup.
- LED indication for power, signal status and line fault conditions.
- Modules accept DC power supply over a wide range for 24 Vdc (20-30 Vdc) applications.
- Wide operating temperature range: -40 to +60/+70 °C.
- Installation in Zone 2 / Division 2.
- Certified for Offshore and Marine applications.
High performance
- High signal transfer accuracy and repeatability.
- Advanced circuitry provides very low heat dissipation, ensuring modules run cool despite their high density and functionality.
- SMD manufacturing to maximize lifetime and enhance reliability.
- Complete absence of electrolytic capacitors ensures minimum 20 years lifetime.
Wide functionality
- Wide range of digital and analog I/O.
- SIL 3 Safety Relay contacts rated for 4 A or 10 A for direct switching of high loads.
- Three port galvanic isolation to eliminate noise,ground loop problems and to provide Intrinsic Safety without a high integrity safety earth connection.
- Line fault alarm detects open or short circuit of field cables.
- Optional power bus DIN-Rail connector.
- Standard Termination Board, custom connectors for integration into customized Boards.
- EMC Compatibility to EN61000-6-2, EN61000-6-4, EN61326-1, EN61326-3-1 for safety system.
Certifications and Approvals
D5000 Series is applied for:- Intrinsic Safety Certification to CENELEC according 94/9/EC (ATEX).
- European Directives for EMC.
- SIL 2 and SIL3 modules according standards IEC61508 and IEC61511