- Home
- Products
- SICK
- Registration Sensors
- Contrast Sensors
- KTS-MB81141142ZZZZ Contrast Sensors SICK | Sensorik Automation SB
KTS-MB81141142ZZZZ Contrast Sensors SICK | Sensorik Automation SB
Quantity
Download Files
KTM-WP11172P.pdf (582.9 KB)
KTM-WN11182P.pdf (582.95 KB)
KTM-WN11172P.pdf (582.92 KB)
KTM-MB31194P.pdf (485.41 KB)
KTM-WP11172P.pdf (582.9 KB)
KTM-WN11182P.pdf (582.95 KB)
KTM-WN11172P.pdf (582.92 KB)
KTM-MB31194P.pdf (485.41 KB)
KTS-MB81141142ZZZZ | Part no.: 1078119
Contrast sensors |
KTS Core
- Communication interface: -
- Teach-in mode: 2-point teach-in, teach-in dynamic
- Light source: LED, White
- Sensing distance: 13 mm
- Switching output: Push-pull: PNP/NPN
- Light spot size: 1.2 mm x 3.9 mm
- Connection type Detail: Male connector M12, 4-pin
- Device type: Standard
-
-
Features
Special applications Standard Device type Standard Dimensions (W x H x D) 26 mm x 62 mm x 47.5 mm Sensing distance 13 mm Sensing distance tolerance ± 3 mm Housing design (light emission) Rectangular Light source LED, White 1) Wave length 400 nm ... 750 nm Light emission Long side of housing Light spot size 1.2 mm x 3.9 mm Light spot direction Vertical 2) Receiving filters None Teach-in mode 2-point teach-in, teach-in dynamic Output function Light/dark switching Delay time - Special features - Delivery status 2-point teach-in Parameter presettings None - 1) Average service life: 100,000 h at TU = +25 °C.
- 2) In relation to long side of housing.
-
Mechanics/electronics
Supply voltage 10.8 V DC ... 28.8 V DC 1) Ripple ≤ 5 Vpp 2) Current consumption < 100 mA 3) Switching frequency 25 kHz 4) Response time 20 µs 5) Jitter 10 µs Switching output Push-pull: PNP/NPN Switching output (voltage) Push/Pull: HIGH = VS - 3 V / LOW ≤ 3 V Output current Imax. 100 mA 6) Input, teach-in (ET) Teach: U = 10 V ... < VS Input, blanking input (AT) Blanked: U = 10 V ... < Uv Input, fine/coarse (F/C) Coarse: U = 10 V ... < Uv Input, light/dark (L/D) Light: U = 10 V ... < Uv Retention time (ET) 35 ms, non-volatile memory Connection type Male connector M12, 4-pin Protection class III Circuit protection UV connections, reverse polarity protected
Output Q short-circuit protected
Interference pulse suppression
Enclosure rating IP67 Weight 68 g Housing material Plastic, VISTAL® Optics material Plastic, COP - 1) Limit values: DC 12 V (–10 %) ... DC 24 V (+20 %). Operation in short-circuit protected network max. 8 A.
- 2) May not exceed or fall below Uv tolerances.
- 3) Without load.
- 4) With light/dark ratio 1:1.
- 5) Signal transit time with resistive load.
- 6) Total current of all Outputs.
-